New Products

LS7805QIK - Power Crank-Up Lighting Stand
  • Applications: Small to medium sized lighting units
  • Can be powered by a standard drill
  • Extension Shaft Diameter: 1 1/2"
  • Upper Shaft Diameter: 1 3/8"
  • Height Adjustment: 54"-132"
  • Base Spread: 54"
  • Aluminum construction
  • Weight Capacity: 80lbs.
  • 58 1/2" Top T-bar holds 6 par lights
  • Side mounted arms hold an additional 3 par lights each
 

INV#13313

$169.95

DB2150 - Stereo USB DI Box
  • 3.5mm Headphone output
  • Mono sum switch
  • Ground lift switch
  • Iso right / iso left switches
  • Custom wound transformer
  • Transformer isolation eliminates ground loops
  • Frequency Response: 10Hz - 20kHz
  • Sample Rate: 96k
  • Dynamic Range: 90dB
  • Output Impedance: 200 Ohms
  • Dimensions (in): 5 3/4" x 3 1/2" x 1 1/2"
 

INV#13311

$99.95

BC1000 - Bluetooth Converter
  • Version: Bluetooth V4.0
  • Power: 3.7V lithium battery w/ included USB charging cable
  • Battery Life: 20 hours
  • Standby Current: <0.5mA
  • Wireless Transmission Range: 10m
  • Sensitivity: -80dBm<à ±0.1% BER
  • Signal to Noise: 75dB
  • Distortion: 0.1%
 

INV#13322

$49.95

DPT5500B - Percussion Table
  • 25 lbs. Weight Capacity
  • 18.5" x 18.5" open platform gives you plenty of room for all your instruments or other accessories
  • 1 cm thick EVA padding keeps your gear secure and protected
  • Height adjustable from 27.5" to 40.5"
  • Platform angle adjustable from 0 to 90 degrees
  • Tripod base keeps stand secure and in place
 

INV#13232

$89.99

GTA4500 - Rechargeable Clip-On Tuner
  • 4-Color display
  • Tuning Modes: Chromatic, Guitar, Bass, Ukulele, Violin
  • Dual 360 degree rotatable clip
  • Rechargable battery allows 5.5 hours of continuous use after each charge
  • +-0.5 Cent tuning accuracy
  • Detection Range: A0 (27.5 Hz) - C8 (4186.0 Hz)
  • Pitch Range: 410Hz - 450Hz
  • Power Supply (included): 3.7V/110mAH
  • Dimensions: 1.3" x 1.2" x 3.7"
 

INV#13226

$13.95

WCB100 - Wood Cajon Brushes
  • 8.5" maple wood handles
  • 6" straight nylon bristles
  • Rubber rings adjust bristle spacing for louder or softer dynamics
  • Longer handle for better control
  • Overall length 14.5"
 

INV#13373

$14.95

MA-100B - 3/8" Male to 5/8" Female Mic Screw Adapter
  • 3/8" male to 5/8" female
  • For use with mic clips w/ European 3/8" threaded inserts
  • 3/8" male to 5/8" female for use with standard mic stands and mic clips/microphones with European 3/8" threaded inserts.
 

INV#13411

$3.95

GS7364 - Collapsible A-Frame Guitar Stand
  • Durable A-frame guitar stand collapses for ease of storage and portability
  • Locking pin adjusts to 3 positions
  • Stepped yoke holds both acoustic and electric guitars
  • EVA rubber padding won't damage your guitar
  • 10-degree tilt back angle and splayed foot print make for a stable foundation
  • Non-slip rubber end caps
  • Black finish
 

INV#13493

$21.95

FHS7201B - French Horn Stand
  • Sturdy A-frame design
  • Soft EVA padding on yokes and backrest protect your horn
  • 20 degree tilt back angle and splayed footprint make for a stable foundation
  • Non-slip rubber feet
  • Heavy-duty 1" x 1" steel tubing
 

INV#13405

$19.95

GTP7000 - Mini Pedal Tuner
  • Tuning Mode: Chromatic
  • Pitch Range: 430 - 450Hz
  • Tuning Tolerance: +/- 0.5 cent
  • 4-Color display
  • True bypass
  • Power: 9v DC
  • Dimensions: 3.6" x 1.5" x 1.2"
 

INV#13315

$28.95

MSB6000 - Tripod Mic Stand Bag
  • Rugged Padded Black Nylon Bag
  • Holds 6 tripod mic stands with booms (MS7701Bs)
  • 39" x 9.5" x 5"
 

INV#13312

$24.95

MSA1.375 - 5/8" to 1 3/8" Adapter
  • Application -5/8"-27 to 1 3/8" adapter - (Threads on standard mic stand and mounts into a speaker cabinet)
  • Size - 3 1/4" x 1 3/8"
  • Weight - 0.3 lbs
  • Max weight capacity - 15 lbs
  • Steel Construction
  • Color: Black
 

INV#13415

$7.95

KB9503B - Height Adjustable Piano Bench
  • Height Adjustment from 17"- 22"
  • Black Gloss Finish
  • Premium Tufted Bench Top
  • Hydraulic Height Adjustment for Easy Use
  • Weight Capacity 330 Lbs
  • Easy Assembly
 

INV#13228

$199.95

MSA2700 - Multi Mic Holder
  • Holds up to 7 handheld mics, including wireless (38mm diameter)
  • Black silicone inserts provide cushioned protection
  • 6.75" x 7.5" Semi-Elliptical Design
  • 5/8" -27 center hole with removable 3/8" adapter included
  • Lightweight aluminum - only 0.5 lbs
  • Black powder coat finish
 

INV#13394

$23.95

CM200 - Cable Management System
  • 4 Freely sliding hooks to store cables, headphones, guitar straps, etc.
  • Spacing between hooks is fully adjustable
  • Size: 29" x 4.5" (depth of hook: 4")
  • Black powder coat finish
 

INV#13410

$39.95

MS7613 - Hex-Base Low Profile Mic Stand
  • Height Adjustment: 36”-65”
  • Hex Base Diameter: 13.5" x 12" x 1.25"
  • Base Weight: 13 lbs.
  • Standard 5/8” - 27 Threading for Clip and Accessory Compatibility
  • 7/8” and 1-1/8” Steel Tubing
  • 1-3/8” Locking Washer at Base
  • Diecast Zinc Clutch with 3” Grip
  • All Metal External Parts
  • Over Sized Knurled Locking Washer for Precise Mic Positioning
  • Cast Iron Embossed Base with M20 Threading and 6 Rubber Feet for Stability
  • Color: Black Powder Coat Finish
 

INV#13157

$59.95

MSA6000 - Platform for Mic Stand
  • Weight 2 lbs (0.9kg)
  • 9" Square platform with 1mm thick pads
  • Weight Capacity 12 lbs.
  • 5/8"-27 female threads attach to standard mic stands and accessories, including KSA7575 for keyboard stands.
 

INV#13509

$9.95

MSA9900 - Professional Telescoping Mic Boom
  • Black All Metal Exterior
  • 21" - 35" Telescoping Boom
  • Diecast S Style Adjustment Knob
  • 180 degrees smooth tilt adjustment
  • 1/8 Turn to lock or release the angle
  • Clutch threading independent of boom so no more "baton twirl"
  • Diecast Counterweight
 

INV#13098

$63.95

RS100 - Amp Tilt Wedge
  • Angle adjustable from 0-30 degrees depending on placement of amp wedge
  • Black nylon fabric with wooden & plastic inserts for extra reinforcement
  • Hook & loop strip securely fastens amp tilt
  • Conveniently collapses to fit in virtually any gig bag
  • Dimensions (in use): 8" x 6.5" x 3.5"
  • Dimensions (collapsed): 8" x 6.5" x 0.5"
 

INV#13020

$20.95

LPT7000 - Deluxe Laptop Stand
  • Height Adjustable from 31" to 51"
  • 15.5" x 11" platform surface
  • 11"x 7" Non-slip silicone pad holds your laptop firmly in place
  • Lightweight and extremely durable
  • Black powder coat finish
  • Non-slip rubber feet
  • Weight Capacity: 12 lbs.
  • Platform is angle adjustable from 0 to 90 degrees for optimal use
  • Easy to setup and breakdown for convenient stage and studio use
 

INV#13430

$45.95

KEP100 - Expression Pedal
  • Heavy-duty construction
  • Textured slip-resistant rubber surface
  • Built in 6 ft. 1/4" TRS cable
  • Includes polarity switch to work with most keyboards and synthesizers
  • Adjustment knob allows you to fine tune the expression range
  • Dimensions: 8 1/4" x 3 1/2" x 2"
 

INV#13147

$26.95

SMS4500-P - Desktop Monitor Stands (Pair)
  • Sold as pair
  • Sturdy Black Powder Coated Steel Construction
  • 9" Deep x 12" Wide Platform top with EVA
  • 0-15 Degree Angle Adjustment
  • 10" x 10" stylish base
  • 4 rubber feet provide non-slip and help absorb shock
  • Secure pin adjustments plus sturdy plastic clutch allow for height adjustments from 9"-12.5"
  • Used properly on a level load bearing surface and with the weight evenly distributed on the upper platform, it can safely hold 45 lbs.
 

INV#13398

$69.95

TBM7000 - Straight Trombone Mute
  • High grade aluminum.
  • Free blowing and non-pitch altered.
  • High grade cork makes for a perfect seal inside the bell of the trombone.
  • Great for students, semi-pro and professional players
 

INV#13401

$38.95

Policy & Agreement |Privacy Policy
®2018 TMPPro Inc. All rights reserved.

Loading, Please Wait...